Wash-Away Fabric Type Stabilizer
36″ x 60″ – a nice BIG piece!
Use this product for any project that needs to be stabilizer-free when complete—such as items made from sheer or very fine fabrics, free-standing lace designs, or any double sided projects that must look the same on the front and back. For designs that are lightly digitized, one layer will be enough; other designs may require two layers. If necessary, apply a light coat of temporary spray adhesive to one side of this stabilizer and then stick it to the wrong side of the project fabric.
To remove the stabilizer: Rough cut away most of the excess stabilizer when finished embroidering. Soak the fabric in cool water for about 30 minutes and then rinse. Add a drop of laundry detergent to another batch of clean, cool water and soak again for 15 to 30 minutes. Rinse well and lay flat or hang to dry. Soak large projects overnight for the second soaking.